These are the best plastic bats at the best price. They are textured on both sides for great clay adhesion. Their edges are rounded for smoothness, long wear, and easier lifting. They are cut from a high quality, marine grade plastic. The material is made by a patented extrusion process which ensures perfect flatness of every bat.
Each bat has 10" on center holes for standard 3/8" bat pins. One hole is oval to accommodate small variations in pin spacing.
Adjusting Hole Sizes
Bat pins frequently vary in their diameter. The slots and holes on these bats are cut to fit snugly. If they are too tight on a particular set of pins, they should be loosened after a couple of placements and removals of the bats. Alternatively, you can roll up a small scrap of sandpaper and pass it through the holes one or twice.
Bat Care
Bats should be cleaned and stacked or stored vertically on a bat rack after use. Do not soak wood bats of any kind. Pots should be wire-cut from the bats after throwing and removed when they are leather hard. The remaining pad of clay should be scraped off before storing the bats. Occasional sponge cleaning is fine.
Dimensions: Round 12" diameter x 1/4" thick
The product image is property of Highwater Clays, Inc. Copying, sharing, and distribution of the images are not permitted. All rights reserved.